 Nickel Alloy Chart
Compositions of Common Nickel Alloy Grades
Maximum weight % unless a range or minimum is shown
 |
200 |
201 |
400 |
K500 |
| Ni |
90.0
min |
99.0
min |
63-70
(3) |
63.0
min (3) |
| C |
0.15 |
0.02 |
0.2 |
0.18 |
| Mn |
0.35 |
0.35 |
2.0 |
1.5 |
| Si |
0.35 |
0.35 |
0.5 |
0.5 |
| P |
- |
- |
0.02 |
- |
| S |
0.01 |
0.01 |
0.015 |
0.01 |
| Cr |
- |
- |
- |
- |
| Mo |
- |
- |
- |
- |
| Cb |
- |
- |
- |
- |
| Ta |
- |
- |
- |
- |
| Co |
- |
- |
- |
- |
| Ti |
- |
- |
- |
0.35-0.85 |
| Al |
- |
- |
0.5 |
2.30-3.15 |
| Fe |
0.4 |
0.4 |
2.5 |
2.0 |
| Other |
- |
Cu,
0.25 max. |
Pb,
0.006; Sn, 0.006; Zn, 0.02 |
Cu,
27.0-33.0 (4) |
| Source |
UNS
N02200 |
UNS
N02201 |
QQ-N-281D |
QQ-N-286F(SH) |
|
600 |
625 |
718 |
800 |
| Ni |
72.0
min. |
rem
(2) |
50.00-55.00 |
30.0-35.0 |
| C |
0.15 |
0.10 |
0.08 |
0.10 |
| Mn |
1.00 |
0.50 |
0.35 |
1.5 |
| Si |
0.50 |
0.50 |
0.35 |
1.0 |
| P |
- |
0.015 |
0.015 |
- |
| S |
0.015 |
0.015 |
0.015 |
0.015 |
| Cr |
14.00-17.00 |
20.00-23.00 |
17.00-21.00 |
19.0-23.0 |
| Mo |
- |
8.00-10.00 |
2.80-3.30 |
- |
| Cb |
- |
3.15-4.15 |
4.75-5.50 |
- |
| Ta |
- |
0.05 |
0.05 |
- |
| Co |
- |
1.00 |
1.00 |
- |
| Ti |
- |
0.40 |
0.65-1.15 |
0.15-0.60 |
| Al |
0.40 |
0.40 |
0.20-0.80 |
0.15-0.60 |
| Fe |
6.00-10.00 |
5.00 |
rem
(2) |
rem
(2) |
| Other |
Cu,
0.50 |
(1) |
B,
0.006;
Cu, 0.30, (1) |
Cu,
0.75 |
| Source |
AMS
5665L |
AMS
5666E |
AMS
5662K |
UNS
N08800 |
|
825 |
901 |
C276 |
| Ni |
38.0-46.0 |
40.00-45.00 |
rem
(2) |
| C |
0.05 |
0.10 |
0.02 |
| Mn |
1.0 |
0.50 |
1.0 |
| Si |
0.5 |
0.40 |
0.08 |
| P |
0.03 |
0.030 |
0.030 |
| S |
0.03 |
0.030 |
0.030 |
| Cr |
19.5-23.5 |
11.00-14.00 |
14.5-16.5 |
| Mo |
2.5-3.5 |
5.00-6.50 |
15.0-17.0 |
| Cb |
- |
- |
- |
| Ta |
- |
- |
- |
| Co |
- |
1.00 |
2.5 |
| Ti |
0.6-1.2 |
2.70-3.10 |
- |
| Al |
0.2 |
0.35 |
- |
| Fe |
rem
(2) |
rem
(2) |
4.0-7.0 |
| Other |
Cu,
1.5-3.0 |
B,
0.010-0.020;
Cu, 0.50; (1) |
V,
0.35;
W, 3.0-4.5 |
| Source |
UNS
N08825 |
AMS
5661E |
UNS
N10276 |
(1) See specification for additional residual element
requirements
(2) remainder
(3) Ni + Co
(4) Cu + Ag
| Disclaimer: Although the information set forth
herein is believed to be correct, Scot Forge makes
no recommendation, or offers no warranty of any kind
with respect to the subject matter or its accuracy.
Scot Forge specifically disclaims all warranties, expressed,
implied, or otherwise, including without limitation,
all warranties of merchantability, fitness, or suitability
for a particular purpose or application. |
|
